It is a coating that does not contain bitumen, cement, mineral stones, structurally flexible sports floors that can be used as a 2nd layer on natural floors, as a stand-alone coating where limited flexibility is desired, resistant to difficult natural conditions, with high adhesion strength.
AREAS OF USE
All types of concrete surfaces,
Concrete boards,
Artificial and natural stone surfaces,
Chipboard coatings.
APPLICATION
Surface Preparation:
Before application, surfaces should be cleaned from dirt, dust, old paint and free particles by mechanical means.
Apply ISOWEIR FIXATOR to the cleaned surface.
Product Preparation and Application:
The product is ready to use in its packaging.
Thinning is not performed.
It should be mixed well before use.
Depending on weather conditions, ISOWEIR ACR - FX2301 application should be started at least 2 hours after ISOWEIR FIXATOR application.
When applying ISOWEIR ACR - FX301, a minimum of 2 hours should be allowed between coats.
Since the product is water-based, it dries with the removal of the water inside.
The higher the temperature, the shorter the drying time.
FEATURES, ADVANTAGES:
It is flexible and resistant to cold and heat, high adhesion.
Easy to apply.
No doweling, nailing or heating is required for surface fixing.
Non-ignitable, self-extinguishing when exposed to a hot flame without spreading the flame.
Thanks to this feature, it meets the definition of “fire retardant coatings”.