ISOWEIR ARMAC, for wet floors; semi-liquid paste, tixotropic.It is a structurally flexible liquid plastic isolation material that does not contain plasticizer and is highly resistant to different climatic conditions and is impermeable to water when dried.Its biggest advantage is that it provides waterproofing together with the bonding process in wet areas.
AREAS OF USE
For bonding topcoat material in pools
As boat deck wood adhesive
As Armoz putty
As waterproofing putty in bathrooms
As wood mounting kit.
APPLICATION
Surface Preparation:
The application surfaces should be cleaned from water, dust, oil, loose, blistered tissue, old painted surfaces, etc.
It must be clean, dry, free of dust and oil.
Horizontal and vertical surfaces are primed with ISOWEIR FIXATOR provided that there are no open areas.
The surface should not be damp during application.
Product Preparation and Application:
The product is ready to use, no thinning is required.
It must be mixed before use.
Apply ISOWEIR ARMAC in two coats on the primed surface.
A waiting period of 2 hours is required between coats
Felt can be applied between coats of ISOWEIR ARMAC.
Felt application must be made at vertical and horizontal intersections in pool insulation.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
FEATURES, ADVANTAGES:
Elasticity: Elastic insulation has an exceptionally flexible structure.
It was observed that there was no separation and rupture of the film layer even at 388% of its own length in the tests.
Fire Resistance: Non-ignitable, self-extinguishing when exposed to a hot flame without spreading the flame.
Thanks to this feature, it meets the definition of “fire retardant coatings”.
Weather Resistance: The elastic insulating dry film layer is highly resistant to ultraviolet radiation.
It prevents water ingress with its water repellency feature.
