PRODUCTS

IMAGE MAX

It is an acrylic resin based, silicone emulsion added matt decorative top coat interior paint.

AREAS OF USE

  • Interior
  • Cement based plasters
  • Molded concrete
  • Plaster
  • Gypsum board
  • Sanded surfaces

APPLICATION

Surface Preparation:

  • Before application, the surfaces should be cleaned from dirt, dust, old paint and free particles by mechanical methods. In order to obtain a flat surface, cracks and pits should be filled with ISOWEIR putty in a way to ensure optical unity.
  • If there is solvent-based paint on the application surface, ISOWEIR TRANSFER PRIMER should be applied.
  • ISOWEIR UNIVERSAL PRIMER should be applied on cement based plaster surfaces and ISOWEIR CONCENTRATED PRIMER applied 1/7 unit on gypsum plaster surfaces.

Product Preparation and Application:

  • Mix before thinning.
  • ISOWEIR IMAGE MAX should be diluted with clean water.
  • After 4-6 hours, ISOWEIR IMAGE MAX is applied in 2 coats to the surfaces after surface preparation and priming, waiting for drying time between coats.

FEATURES, ADVANTAGES:

  • It gives a matte and decorative appearance to the applied surface.
  • It has silicone emulsion additive.
  • It is odorless.
  • It has a high covering power.
  • No cracking, blistering and flaking.
  • Low VOC