PRODUCTS

ISOWEIR M97

ISOWEIR U97 is a semi-liquid paste-shaped, tixotropic, elastic when dry, water impermeable, highly resistant to various climatic conditions, highly UV resistant, structurally flexible elastomeric resin based liquid plastic sealant forming a monoblock structure.

AREAS OF USE

  • Flexible, durable, 100% waterproofing in fiber cement roofing, bitumen coated roof, sandwich panel roof systems
  • Insulation of aluminum, wood and PVC frames against water and wind
  • Metal roofs and gutters, joints and joints of building elements, eaves
  • Insulation of chimney flashings, cracks and other details
  • Concrete repair and protection of parapets
  • Insulation of concrete, plaster, screed, cement board, galvanized, zinc, aluminum, PVC, polyester, wood covered sloping or flat roofs and ceramic terraces
  • Insulation of exterior facades of buildings

APPLICATION

Surface Preparation:

  • Application surfaces should be cleaned from dust, dirt and oil and the surface should be dry.
  • Loose layers should be removed and small cracks and irregularities on the surface can be corrected
  • With ISOWEIR U97 mixed with finely washed sand in a ratio of 1 to 3 and turned into a putty.
  • Before application, horizontal and vertical surfaces must be primed with "ISOWEIR FIXATOR" primer, leaving no open areas.
  • ISOWEIR FIXATOR can be applied by brush, roller or spray gun.
  • Felt must be applied on parapet corners, light shafts, chimney flashing, bridging cracks, vertical and horizontal intersections.
  • Surfaces exposed to pedestrian and freight traffic are recommended to be covered with a protective coating material such as screed and ceramic tiles.

Product Preparation and Application:

  • The product is ready to use, no thinning is required.
  • It is applied on all surfaces in 2 coats provided that there is no open area, waiting for the required drying time between the coats and applied with a brush or roller.
  • Since the product is water-based, it dries with the removal of the water inside.
  • For this reason, the drying time shortens as the temperature increases.

Points to be Considered:

  • Eyes should be protected during the application.
  • It is recommended to wear gloves.
  • In case of skin contact, wash thoroughly with plenty of water and soap.

FEATURES, ADVANTAGES:

  • Elasticity: Elastic insulation has an exceptionally flexible structure.
  • Tests have shown that it has 625% stretch and tensile strength.
  • Fire Resistance: Non-ignitable, self-extinguishing when exposed to a hot flame without spreading the flame.
  • Thanks to this feature, it meets the definition of “fire retardant coatings”.
  • Weather Resistance: The elastic insulating dry film layer is highly resistant to ultraviolet radiation.
  • It prevents water ingress with its water repellency feature.
  • Weather Fastness(1-5) : Value 5