is an anti-corrosion transparent insulation material that is applied on tiles, marble joints, water-based paint systems, formed by wax emulsion and flexible polymer synthesis that dissolves at high temperature and pressure, forming a 100% water impermeable and flat surface that provides inhalation on the applied surface, resistant to the U / V rays of the sun.
AREAS OF USE
Tile and marble joints
Water-based paint systems
Wooden structures
Wooden garden furniture
APPLICATION
Surface Preparation:
The application surfaces should be cleaned from water, dust, oil, loose, blistered tissue, old painted surfaces, etc.
It must be clean, dry, free of dust and oil.
When applied on solvent-based systems, the varnish on the ground should be abraded with mechanical methods (sanding, wire brush, etc.).
Product Preparation and Application:
The product is ready to use, no thinning is required.
It must be mixed before use.
Apply ISOWEIR TP00 in two coats on the primed surface.
A waiting period of 2 hours is required between coats during application.
It is applied only to the joints with a brush.
The tiles are cleaned by wiping them.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
FEATURES, ADVANTAGES:
It is transparent and it does not spoil the aesthetic appearance on the surface.
Resistant to U/V rays of the sun
100% waterproof. They stabilize water vapor permeability.
It provides 100% water insulation in wooden structures.
