ISOWEIR U96 is a semi-liquid paste-shaped, tixotropic, elastic when dry, water impermeable, highly resistant to various climatic conditions, highly UV resistant, structurally flexible elastomeric resin based liquid plastic sealant forming a monoblock structure.
AREAS OF USE
In foundation and retaining walls
In waterproofing (encapsulation)
In basement floors and foundation insulation
At expansion joints of surface connection points
At connection points and joints of structural elements
In the repair and protection of parapet concrete
For waterproofing bathrooms and wet areas, and for ceramic bonding
In insulation of concrete, plaster, screed, cement boards
PVC, polyester, sloped or flat roofs, and ceramic terraces
In roof gutters and channels
For insulation of eaves, chimney bases, cracks, and other details
For protecting wooden and PVC frames against water and wind
On fiber cement roofs, bitumen-coated roofs
To provide durable
100% waterproof insulation
APPLICATION
Surface Preparation:
Application surfaces should be cleaned from dust, dirt and oil and the surface should be dry.
Loose layers should be removed and small cracks and irregularities on the surface can be corrected with ISOWEIR U96 mixed with finely washed sand in a ratio of 1 to 3 and turned into a putty.
Before application, horizontal and vertical surfaces must be primed
With “ISOWEIR FIXATOR” primer, leaving no open areas.
ISOWEIR FIXATOR can be applied by brush, roller or spray gun.
Felt must be applied on parapet corners, light shafts, chimney flashing, bridging cracks, vertical and horizontal intersections in pool insulations.
Surfaces exposed to pedestrian and freight traffic are recommended to be covered with a protective coating material such as screed and ceramic tiles.
Product Preparation and Application:
The product is ready to use, no thinning is required.
It is applied on all surfaces in 2 coats provided that there is no open area, waiting for the required drying time between the coats and applied with a brush or roller.
Since the product is water-based, it dries with the removal of the water inside.
For this reason, the drying time shortens as the temperature increases.
Points to be Considered:
Points to be Considered: Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
FEATURES, ADVANTAGES:
Elasticity: Elastic insulation has an exceptionally flexible structure.
Tests have shown that it has 625% stretch and tensile strength.
Fire Resistance: Non-ignitable, self-extinguishing when exposed to a hot flame without spreading the flame.
Thanks to this feature, it meets the definition of “fire retardant coatings”.
Weather Resistance: The elastic insulating dry film layer is highly resistant to ultraviolet radiation.
It prevents water ingress with its water repellency feature.
