ISOWEIR W98 is an elastomeric resin based liquid plastic isolation material for wet floors; semi-liquid paste shaped, tixotropic, elastomeric resin based liquid plastic isolation material that forms an elastic water impermeable layer when dry, highly resistant to different climatic conditions.
AREAS OF USE
Waterproofing of horizontal and vertical surfaces
Joints and joints of building elements
Insulation of bathrooms and wet areas
Waterproofing under ceramic tiles
Water tanks
APPLICATION
Surface Preparation:
Application surfaces should be cleaned from dust, dirt and oil and the surface should be dry.
Loose layers should be removed and small cracks and irregularities on the surface can be corrected with ISOWEIR U98 mixed with finely washed sand in a ratio of 1 to 3 and turned into a putty.
Before application, horizontal and vertical surfaces must be primed with "ISOWEIR FIXATOR" primer, leaving no open areas.
ISOWEIR FIXATOR can be applied by brush, roller or spray gun.
Felt must be applied on parapet corners, light shafts, chimney flashing, bridging cracks, vertical and horizontal intersections.
Surfaces exposed to pedestrian and freight traffic are recommended to be covered with a protective coating material such as screed and ceramic tiles.
Product Preparation and Application:
The product is ready to use, no thinning is required.
It is applied on all surfaces in 2 coats provided that there is no open area, waiting for the required drying time between the coats and applied with a brush or roller.
Since the product is water-based, it dries with the removal of the water inside.
For this reason, the drying time shortens as the temperature increases.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
FEATURES, ADVANTAGES:
Elasticity: Elastic insulation has an exceptionally flexible structure.
Tests have shown that it has 625% stretch and tensile strength.
Fire Resistance: Non-ignitable, self-extinguishing when exposed to a hot flame without spreading the flame.
Thanks to this feature, it meets the definition of “fire retardant coatings”.
Weather Resistance: The elastic insulating dry film layer is highly resistant to ultraviolet radiation.
It prevents water ingress with its water repellency feature.
