PRODUCTS

İZOPULVER

ISOWEIR IZOPULVER is an elastomeric resin based liquid plastic isolation material that can be applied with airless paint machines for wet floors, forming a semi-liquid, elastic, water impermeable layer that is highly resistant to different climatic conditions when dry.

AREAS OF USE

  • It is used to provide flexible, durable, 100% waterproofing in wet floors
  • Atermit roof
  • Bitumen coated roof
  • Sandwich panel roof
  • Concrete roof systems

Since it is easy to apply, the possibility of workmanship error is low, it provides the most economical and robust technological renewal opportunity in roof repairs.

APPLICATION

Surface Preparation:

  • Application surfaces should be cleaned from dust, dirt and oil and the surface should be dry.
  • Before application, horizontal and vertical surfaces must be primed with "ISOWEIR FIXATOR" primer, leaving no open areas.
  • ISOWEIR FIXATOR can be applied by brush, roller or spray gun.
  • Felt must be applied on parapet corners, light shafts, chimney flashing, bridging cracks, vertical and horizontal intersections in pool insulations.
  • Surfaces exposed to pedestrian and freight traffic are recommended to be covered with a protective coating material such as screed and ceramic tiles.

Product Preparation and Application:

  • The product is ready to use, no thinning is required
  • Apply ISOWEIR IZOPULVER in two coats on the primed surface.
  • A waiting period of 2 hours is required between coats during application.
  • It is applied on all surfaces in 2 coats provided that there is no open area, waiting for the required drying time between the coats and applied with a brush or roller.

Points to be Considered:

  • Eyes should be protected during the application.
  • It is recommended to wear gloves.
  • In case of skin contact, wash thoroughly with plenty of water and soap.
  • In case of contact with eyes, consult a doctor.

FEATURES, ADVANTAGES:

  • Elasticity: Elastic insulation has an extraordinarily elastic structure. tests have shown that there is no separation and rupture of the film layer even at 2 times its own length.
  • Fire Resistance: Non-ignitable, self-extinguishing when exposed to a hot flame without spreading the flame.
  • Thanks to this feature, it meets the definition of “fire retardant coatings”.
  • Weather Resistance: The elastic insulating dry film layer is highly resistant to ultraviolet radiation.
  • It prevents water ingress with its water repellency feature.
  • Weather Fastness (1-5): Value 5