PRODUCTS

İZOTEMEL SON KAT

Is an elastomeric resin based, liquid plastic, one component, semi-liquid paste shaped, tixotropic, elastic when dry, water impermeable, high alkali resistant, liquid plastic, one component top coat sealant material developed for basic insulation plaster.

AREAS OF USE

  • IZOWEIR IZOTEMEL applications as top coat protective coating,
  • Dilatation of surface joints and joints of building elements,
  • Insulation of exterior facades of buildings, insulation of aluminum,
  • Wood and PVC frames against water and wind.

APPLICATION

Surface Preparation:

  • For applications on ISOWEIR IZOTEMEL, the application surface must be free from dust, dirt and oil and the surface must be dry.
  • In other insulation applications, loose layers should be removed, small cracks and defects on the surface can be corrected with ISOWEIR WATER SHUTOFF mixed with fine washed sand in a ratio of 1 to 3 and made into a paste.
  • Before application, horizontal and vertical surfaces must be primed with "ISOWEIR FIXATOR" primer, leaving no open areas.
  • ISOWEIR FIXATOR can be applied by brush, roller or spray gun.
  • Felt must be applied on parapet corners, light shafts, chimney flashing, bridging cracks, vertical and horizontal intersections in pool insulations.
  • Surfaces exposed to pedestrian and freight traffic are recommended to be covered with a protective coating material such as screed and ceramic tiles.

Product Preparation and Application:

  • The product is ready to use, no thinning is required.
  • Mix well before use.
  • In the applications to be made on ISOWEIR IZOTEMEL base coating plaster, if ISOWEIR IZOTEMEL is applied in sufficient thickness and homogeneously according to the instructions, it is sufficient to apply 1 coat of ISOWEIR IZOTEMEL TOP COAT.
  • If you notice surface defects and application errors in the plaster application,
  • we recommend applying a 2nd coat.
  • It is applied on all surfaces in 2 coats provided that there is no open area, waiting for the required drying time between the coats and applied with a brush or roller in other applications.
  • Since the product is water-based, it dries with the removal of the water inside.
  • For this reason, the drying time shortens as the temperature increases.
  • Points to be Considered: Eyes should be protected during the application.

Points to be Considered:

  • Eyes should be protected during the application.
  • It is recommended to wear gloves.
  • It is recommended to wear gloves.
  • In case of skin contact, wash thoroughly with plenty of water and soap.
  • In case of contact with eyes, consult a doctor.

FEATURES, ADVANTAGES:

  • It has an elastic insulation dry film layer and high alkali resistance.
  • It forms a seamless, watertight, high strength layer.
  • It is resistant to continuous water contact.
  • It prevents water ingress with its water repellency feature.
  • Weather Fastness(1-5):Value 5
  • Elastic insulation has an exceptionally flexible structure.
  • It was observed in the tests that there was no tearing and rupture in the film layer even at double coating of its own length.
  • It is highly resistant to abrasion, non-spontaneous ignition, self-extinguishing when exposed to a hot flame without spreading the flame.
  • Thanks to this feature, it meets the definition of “fire retardant coatings”.