KAUFIX KN15
It is a water-based, one-component flexible contact adhesive.
AREAS OF USE
- Insulation of air conditioning ducts, ventilation ducts with rubber sheet,
- Rubber pipe insulation applications,
- Tank insulation applications with rubber sheet,
- Bonding of synthetic rubber based insulation materials.
APPLICATION
Surface Preparation:
- Application surfaces should be cleaned from dirt, dust, oil and free particles by chemical and mechanical methods.
Product Preparation and Application:
- The product is ready to use in its packaging.
- Thinning is not performed.
- It should be mixed thoroughly before use. Avoid application in areas exposed to strong sunlight and wind.
- The ideal
- application environment should be between 20°C - 30°C and humidity should not exceed 70%.
- The adhesive should be applied with a brush or roller on both surfaces in a thin and homogeneous layer, leaving no open areas.
- It should then be left to dry for a while.
- 12 - 60 minutes depending on ambient temperature and humidity.
- After slightly drying, once both surfaces appear transparent, the pieces to be bonded should be tightly joined.
- Here, it is very important to apply the adhesive on both surfaces.
- Because in some applications, adhesive is applied only on one surface.
- This process makes it difficult for the material to adhere and weakens the strength.
- Applying adhesive to both surfaces will increase the value and durability of the insulation and create compatible surfaces.
- The adhesive reaches its full bond strength after approximately 72 hours, depending on weather and humidity conditions.
- The system must not be operated before this period expires and self-adhesive tape or protective coatings must not be applied during this period.
FEATURES, ADVANTAGES:
- It is compatible with metal and galvanized surfaces.
- For painted surfaces, a compatibility test should be carried out.
- It is an environmentally friendly product due to its very low VOC values.