ISOWEIR LSK is a micro-polymer dispersion that minimizes molecular voids in cement mortars, ensuring waterproofing.
AREAS OF USE
In thin plaster mortars: Reinforced concrete silos, water tanks, pools, and treatment plants.
In interior and exterior plasters: Used as an additive material to increase water impermeability.
In screeds: Used as an additive material to obtain a non-cracking surface with high adherence even in 1.5-2 cm thick screeds.
APPLICATION
Surface Preparation:
In plaster mortars: Mix 350 kg of cement with 1 m³ of washed river sand of suitable particle size. Add LSK to the prepared powder mixture and stir until a putty-like consistency is achieved before application.
The application surface should be wetted 10-12 hours in advance.
The prepared mortar is applied to the wet surface.
In Screeds:
Priming: 1 portion of cement is mixed with 3 portions of river sand.
The screed primer additive is mixed into the prepared powder mixture until it reaches a consistency that can be applied with a brush and applied to the floor with a brush.
Thickness should be 1-2 mm.
Product Preparation and Application:
The product is ready to use, no thinning is required
ISOWEIR FIXATOR SLV is applied to the cleaned surface in two coats by brush, roller or pulvarized, provided that no open areas are left uncovered.
The second coat application is to ensure that there are no untreated areas due to the transparency of the product.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
FEATURES and ADVANTAGES:
It creates a strong permanent base.
It provides high adherence and elasticity.
It provides high resistance to oil and salt solutions.
It dries without forming cracks and improves wear resistance.
It ensures long life of the paint in paint application.
