ISOWEIR NE 2K is a two-component, high performance water plug containing special mineral filler and cement that sets instantly and prevents active water leakage.
AREAS OF USE
It is used for preventing leaking or pressurized water from cracks and gaps
For stopping and blocking pressurized or leaking active water leaks in basements
Curtain walls in foundations
Reinforced concrete water tanks and concrete pipes before insulation
For waterproofing pipe and cable penetrations
For filling and insulating tension iron gaps in formwork
For insulating basement floors from inside together with ISOWEIR KR 2K (CRYSTALIZED)
APPLICATION
Surface Preparation:
Surfaces should be clean and free of free particles.
Oil, grease, dirt, paint, cement foam, rust, salt vomit and other layers that may reduce adherence must be completely removed before application.
Cracks and holes should be scraped to a depth of 2 cm before application.
Product Preparation and Application:
B and A components should be mixed in a ratio of 2/5 and the mortar should be brought to dough consistency.
Protective gloves must be worn when mixing the mixture to mortar consistency.
The mortar in the consistency of dough should be conically shaped within 10 - 20 SECONDS and applied to the area of water leakage by hand, with a single movement and pressure.
Continue to apply constant pressure for at least 1.5 - 2 minutes until the material hardens.
Immediately after the application, the excess on the surface should be removed with tools such as chisel, spatula etc. and the surface should be leveled.
After application, hands and application tools should be washed with plenty of water.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
FEATURES, ADVANTAGES:
Easy to apply.
It quickly sets to form an impermeable plug.
It does not corrode reinforced concrete reinforcement.
It has excellent adhesion to the surface.
It has very high mechanical strength.
Any kind of waterproofing material can be applied on it.