It is a water-based, elastromeric acrylic resin-based, decorative coating material that does not leave brush marks on building facades, especially in coastal areas, does not leave brush marks, shows the texture of wood when applied on wood, and is not affected by moisture, salt and iodine.
AREAS OF USE
It is used for insulation and decorative purposes in wooden buildings
Wooden buildings on the seashore
Concrete, plaster, brick, old and new building facades on exterior surfaces.
WARNING : It cannot be used on wooden floorings.
APPLICATION
Surface Preparation:
All surfaces should be cleaned from dirt, oil, dust, old paint and free particles before application.
For new wood surfaces: The wood surface should be sanded with 80-120 grit sandpaper.
The resulting dust must be thoroughly cleaned.
On Old Unpainted, Unvarnished Wood Surfaces: The worn, discolored wood should be sanded with 80-120 grit sandpaper.
The resulting dust must be thoroughly cleaned.
Painted, Varnished Wood Surfaces: Do not apply the product directly to painted, varnished surfaces.
Old paint must be completely removed from the varnished surface using sandpaper.
The resulting dust must be thoroughly cleaned.
After these processes, ISOWEIR FIXATOR is applied to all surfaces in a single coat.
After waiting for the drying time of ISOWEIR FIXATOR, paint application is started.
Product Preparation and Application:
The product should be mixed before application and should be used without thinning by waiting for drying time between coats.
In very hot weather, if necessary, it can be diluted up to 10% with good water.
Apply in the direction of the grain of the wood to achieve a homogeneous appearance.
Do not use the product in direct sunlight or in rainy weather.
FEATURES, ADVANTAGES:
It has high resistance to atmospheric conditions.
It has a high alkali resistance.
In coastal areas, it has high resistance to salt vapor.
High U/V resistance.
It has the ability to cover cracks.
It prevents concrete damage.
It is structurally flexible (not plasticized).
It does not prevent vapor diffusion.
It does not transmit flame (in accordance with the definition of fire retardant coating).
It provides waterproofing on facades
It does not swell, crack or flack due to its high adhesion and strong bond structure.
Low VOC (in accordance with European Union norms VOC values).
