ISOWEIR ZEEPMAC 2K is a two-component, solvent-free epoxy resin, aliphatic amine, mounting epoxy that can be used for record bonding and fine repairs.
AREAS OF USE
Bonding of carbon plates without any gap between the surface and the surface, bonding of granite, marble, ceramic, natural stones.
Restoration of historic buildings.
It is used in areas where high mechanical resistance is required as a leveling putty on all surfaces where acid base resistance is required.
APPLICATION
Surface Preparation:
On concrete surfaces, the entire surface should be cleaned of dust, dirt and free particles by mechanical means.
Sa 2.5 sand blasting should be applied to corroded column iron reinforcements.
An oxidation protector (ISOWEIR U-Pox Shop Primer) is applied on the rust-free iron reinforcement.
Deep pits and cracks should be filled by adding micro polymer primer material into the fiber mortar in the amount of water to be used in order to provide optical unity.
All sharp edges of the surfaces should be chamfered.
Product Preparation and Application:
The mixing ratio should be 16 kg of Component A and 4 kg of Component B by weight.
Add all of B compound prepared in accordance with ISOWEIR ZEEPMAC 2K mixing ratios into A compound and mix with a 300 rpm mixer with suitable paddles and blades until 2-3 is homogenized.
Apply 1-1.5 mm spatula on the Carbon Plate surface and the area to be adhered 24 hours after Zeepas Primer application, taking into account the application temperature limits.
It is ensured that there is no air gap between it and the mounted surface by pressing the plate.
Apply a thin coat of ISOWEIR ZEEPSON FRP 2K on the plate and sprinkle sand on the surface.
This process increases the adhesion surface area for the plaster to be applied later and ensures strong adhesion.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
In case of skin contact, wash thoroughly with plenty of water and soap.
In case of contact with eyes, consult a doctor.
All work tools should be cleaned with ISOWEIR TINER immediately after application.
FEATURES, ADVANTAGES:
It is applied on vertical and horizontal ceiling surfaces.
Adhesion (two different materials sticking to each other) is high.
It has a high moisture tolerance.
It is solvent free.
It is resistant against physical and chemical factors.
