ISOWEIR ZEEPSON VERTICAL SURFACE is a solvent-free epoxy resin based, thixotropic, two-component, water and solvent resistant, hygienic top coat coating material that can show superior resistance against physical and chemical factors.
AREAS OF USE
Food production facilities,
Hospitals,
Cold storage,
Petroleum, fuel oil, paraffin, oil, diesel oil, storage tanks containing various concentrations of acids and various solvents,
Parking garages,
Cargo warehouses, ballast tanks, water tanks and other tanks,
Swimming pools and other pools.
APPLICATION
Surface Preparation:
Metal surfaces should be sand blasted at SA 2,5 and the blasted surface should be cleaned with dry air.
If the concrete is new, the floor concrete should be cured (~ 21 days) and the moisture content of the concrete should not exceed 4%.
Concrete surfaces should be thoroughly cleaned, dust and loose particles should be removed with rotating steel or vacuum cleaner, cracks and eyelet holes should be filled.
After surface preparation, the concrete floor should be primed with suitable ISOWEIR ZEEPAS primer material and made ready for topcoat application.
Product Preparation and Application:
The mixing ratio should be 16 kg of Component A and 4 kg of Component B by weight.
Component A should be mixed with a low speed mixer until homogenized.
Component B should then be added to component A and the mixture should be mixed at about 100 rpm for at least 2 minutes.As the amount of contents you are mixing increases, you may need to increase your mixing time or mixing speed. As soon as you start mixing, there will be a cloudy appearance in the system at first, and as the mixing continues, it will start to become transparent again.
Scrape the finished mixture into another clean container and mix again.
To minimize air entrainment (to avoid bubbles), mixing should not be done for too long and at high speed.
After opening the package, ISOWEIR ZEEPSON VERTICAL SURFACE is homogenized by thorough mixing, preferably with a drill motor, and mixed with the second component at the specified ratio.
Points to be Considered:
Eyes should be protected during the application.
It is recommended to wear gloves.
FEATURES, ADVANTAGES:
Being solvent-free, it can be safely used in closed areas, water tanks, food and hygiene areas where compliance with hygiene conditions is required.
It can be used as coating and insulation material in drinking water tanks.
It is an antitoxide.
When used in water tanks, there is no change in the taste and odor of water.
