PRODUCTS

IMAGE PLUS

It is an acrylic emulsion based, matte, top coat decorative interior paint.

AREAS OF USE

  • Interior
  • Cement based plasters
  • Molded concrete
  • Plaster
  • Gypsum board
  • Sanded surfaces

APPLICATION

Surface Preparation:

  • Before application, surfaces should be cleaned from dirt, dust, old paint and free particles by mechanical means.
  • Cracks and pits should be filled with ISOWEIR putty to achieve an optically uniform surface.
  • If there is solvent-based paint on the application surface, ISOWEIR TRANSFER PRIMER should be applied.
  • ISOWEIR UNIVERSAL PRIMER to be applied on cement based plaster surfaces.
  • ISOWEIR CONCENTRATED PRIMER should be applied 1/7 unit on the surfaces where gypsum plaster is applied.

Product Preparation and Application:

  • Mix before thinning
  • ISOWEIR IMAGE PLUS should be diluted with clean water.
  • After 4-6 hours, ISOWEIR IMAGE PLUS is applied in 2 coats to the surfaces after surface preparation and priming, waiting for drying time between coats.

FEATURES, ADVANTAGES:

  • It gives a matte and decorative appearance to the applied surface.
  • It has silicone emulsion additive.
  • It is odorless.
  • It has a high covering power.
  • No cracking, blistering and flaking.
  • Low VOC